Year 2012


G. Kawamura, I. Hayashi, H. Muto, and A. Matsuda, "Anisotropically Assembled Gold Nanoparticles Prepared Using Unidirectionally Aligned Mesochannels of Silica Film", Scripta Materialia66[7], 479-482 (2012).

G. Kawamura, T. Okuno, H. Muto, and A. Matsuda, "Selective preparation of Zero- and One-Dimensional Gold Nanostructures in TiO2 Nanocrystal-Containing Photoactive Mesoporous Template", Nanoscale Reseach Letters, 7[27], pp.1-8 (2012). 

S. Oh, K. Kawai, G. Kawamura, H. Muto, and A. Matsuda, "Characterization of mechanochemically synthesized MHSO4-H4SiW12O40 composites (M = K, NH4, Cs)", Materials Research Bulletin, 掲載決定. 

M. T. Soo, N. Prastomo, A. Matsuda, G. Kawamura, H. Muto, A. F. M. Noor, Z. Lockman, and K. Y. Cheong, "Elaboration and Characterization of Sol-Gel Derived ZrO2 Thin Films Treated with Hot Water", Applied Surface Science, 258[13], pp.5250-5258 (2012).

W. Krengvirat, S. Sreekantan, A. F. M. Noor, A. Matsuda, and C. Chinwanitcharoen, "Fuel-Free Low-Temperature Self-Combustion Synthesis and Characterization of Praseodymium-Substituted Bismuth Titanate Ceramics", Journal of the Ceramic Society of Japan, 120[2], pp.58-63(2012).

S. Sreekantan, W. Krtengvirat, A. Fauzi M. N., A. Matsuda, C. Chinwanitcharoen, "Influences of pH on the Structure, Morphology and Dielectric Properties of Bismuth Titanate Ceramics Produced by a Low-Temperature", Self-Combustion Synthesis without an Additional Fuel AgentCeramic International, 38[4], pp.3001-3009 (2012).

H. Sakamoto, Y. Daiko, H. Muto, M. Sakai, A. Matsuda, Preparation of Multilayered Thin Film Fuel Cell Using Titanium Oxide as Anodic Catalyst via Layer-by-Layer Assembly", Solid State Ionics, 214[25], pp.62-66 (2012).

S-Y. Oh, E. K. Insani, V. H. Nguyen, G. Kawamura, H. Muto, M. Sakai, and A. Matsuda, "Mechanochemically Synthesized CsH2PO4-H3PW12O40 Copmosites as Proton Conducting Electrolytes for Fuel Cell Systems in Dry Atmosphere", Science and Technology of Advanced Materials, 掲載決定

W. Krengvirat, S. Sreekantan, A. Fauzi M. N. C. Chinwanitcharoen, G. Kawamura, and A. Matsuda, "Control the Structure, Morphology and Dielectric Properties of Bismuth Titanate Ceramics by Praseodymium Substitution Using an Intermediate Fuel Agent-Assisted Self-Combustion Synthesis", Journal of Materials Science, 掲載決定

S-Y. Oh, D. Uchihori, G. Kawamura, H. Muto, and A. Matsuda, "Mechanochemical Synthesis of Proton Conductive Composites consisting of Cesium Dihydrogen", Phosphate and Guanine, Solid State Ionics, 掲載決定

W. Krengvirat, S. Sreekantan, Ahmad-Fauzi M. N. A. Matsuda, N. Negishi, and C. Chinwanitcharoen, "Enhanced Photoelectrochemical Properties of Visible Light Responsive TiO2 Photoelectrode for Hydrogen Generation by the Control of Nanotubes Features via Rapid-Anodic Oxidation", International Journal of Hygrogen Energy, 掲載決定



top of page


Year 2011


S-Y. Oh, T. Yoshida, G. Kawamura, H. Muto, and A. Matsuda, "Solid-State Mechanochemical Synthesis of CsHSO4 and 1,2,4-Triazole Inorganic-Organic Composite Electrolytes for Dry Fuel Cells", Electrochimica Acta, 56[5] 2364-2371 (2011).

Z. Lockman, S. Ismail, G. Kawamura, A. Matsuda, "Formation of Zirconia and Titania Nanotubes in Fluorine Contained Glycerol Electrochemical Bath", Defect and Diffusion Forum, 312-315 76-81 (2011)

Lan-Young Hong, Song-Yul Oh, Atsunori Matsuda, Chang-Soo Lee, and Dong-Pyo Kim, "Hydrophilic and Mesoporous SiO2-TiO2-SO3H System for Fuel Cell Membrane Applications", Electrochimica Acta, 56[9] 3108-3114 (2011)

N. Prastomo, G. Kawamura, H. Muto, M. Sakai, and A. Matsuda, "High Surface Area BaZrO3 Photocatalyst Prepared By Base-Hot-Water Treatment" Journal of the European Ceramic Society, 31[14], 2699-2705 (2011)

N. Prastomo, M. M. Ayad, and A. Matsuda, "Synthesis and Characterization of Polyaniline Nanofiber/TiO2 Nanoparticles Hybrid", Journal of the Ceramic Society of Japan, 119[5] 342-345 (2011)

Y. Tsutsui, T. Hayakawa, G. Kawamura, and M. Nogami, "Tuned Longitudinal Surface Plasmon Resonance and Third-Order Nonlinear Optical Properties of Gold Nanorods", Nanotechnology, 22[27] 275203 (7pp) (2011)

G. Kawamura, Y. Tsurumi, H. Muto, M. Inoue, and A. Matsuda, "Sol-Gel Synthesis of Novel Photosensitive Material with Advanced Holographic Properties", Journal of the Ceramic Society of Japan, 119[6] 426-429 (2011)

A. R. Ainuddin, N. Hakiri, H. Muto, M. Sakai, and A. Matsuda, "Mechanical Properties Comparison of Phenylsilsesquioxane-Methylsilsesquioxane Hybrid Films by Indentation", Journal of the Ceramic Society of Japan, 119[6] 490-493 (2011)

M. T. Soo, G. Kawamura, H. Muto, K. Y. Cheong, Z. Lockman, A. F. M. Noor, A. Matsuda, "Design and Synthesis of Mesoporous ZrO2 Thin Films Using Surfactant Pluronic P123 via Sol-Gel Technique", Journal of the Ceramic Society of Japan, 119[6] 517-521 (2011)

S-Y. Oh, E. K. Insani, V. H. Nguyen, G. Kawamura, H. Muto, M. Sakai, and A. Matsuda, "Mechanochemically Synthesized CsH2PO4-H3PW12O40 Copmosites as Proton Conducting Electrolytes for Fuel Cell Systems in Dry Atmosphere" Science and Technology of Advanced Materials, 12[3], 034402 (6pp) (2011)

J. Hamagami, R. Araki, S. Onimaru, H. Oda, G. Kawamura, and A. Matsuda, "Low Temperature Preparation and Optical Hydrogen Response of Pd/Titania Composite Film", Key Engineering Materials, 485, 275-278 (2011)

W. A. W. Ibrahim, A. S. A. Keyon, N. Prastomo, and A. Matsuda, "Synthesis and Characterization of Polydimethylsiloxane-Cyanopropyltriethoxysilane-Derived Hybrid Coating for Stir Bar Sorptive Extraction", Journal of Sol-Gel Science and Technology, 59[1], 128-134 (2011)

T. Suzuki, T. Uchikoshi, S. Sakakibara, H. Muto, A. Matsuda, Y. Sakka, "Texture Development of Surface-Modified SiC Prepared by EPD in a Strong Magnetic Field", Journal of the Ceramic Society of Japan, 119[8], 667-671 (2011)

G. Kawamura, Y. Tsurumi, H. Muto, M. Sakai, M. Inoue, and A. Matsuda, "Reversible Conversion between AgCl and Ag in AgCl-doped RSiO3/2-TiO2 Films Prepared by a Sol-Gel Technique", Materials Chemistry and Physics, 130[1-2], 264-269 (2011)

G. Kawamura, M. Murakami, T. Okuno, H. Muto, and A. Matsuda, "Length Control of Ag Nanorods in Mesoporous SiO2-TiO2 by Light", RSC Advances, 1[4], 584-587 (2011)

A. Matsuda, S-Y. Oh, V. H. Nguyen, Y. Daiko, G. Kawamura, and H. Muto, "Anhydrous Proton Conductivity of KHSO4-H3PW12O40 Composites and the Correlation with Hydrogen Bonding Distance under Ambient Pressure", Electrochimica Acta, 56[25], 9364-9369 (2011)

H. Sakamoto, M.A.M. Nor, N.H.B. Zakaria, G. Kawamura, H. Muto, and A. Matsuda, "Low Temperature Fabrication of Titanium Oxide Composite Films by Hot-Water Treatment and Application for Dye-Sensitized Solar Cells", Electrochemistry, 79[10], 1-4 (2011).

H. Sakamoto, Y. Daiko, H. Muto, and A. Matsuda, "Estimation of Interfacial Proton Conductivity by Effective Media Approximation for Sheet-Like Composite Electrolyte Prepared from Poly(2-acrylamido-2-methyl-1-propanesulfonic acid)-Deposited Particles Science and Technology of Advanced Materials Science and Technology of Advanced Materials", Journal of the Electrochemical Society Japan , 119[11], 845-859 (2011)

G. Kawamura, I. Hayashi, H. Muto, and A. Matsuda, "Anisotropically Assembled Gold Nanoparticles Prepared Using Unidirectionally Aligned Mesochannels of Silica Film", Scripta Materialia66[7], 479-482 (2012).

松田厚範・大幸裕介、「イオン伝導性の高いナノ領域を導入した新しいプロトン伝導性固体電解質(解説)」、マテリアルインテグレーション、24[1]、30-37 (2011). 

松田厚範、「複合系ナノプロトニクス材料の設計(解説)」、Electrochemistry79[8]、621-625(2011).

松田厚範、「プロトン伝導性コア/シェル粒子のイオニクス素子への応用「コア/シェル粒子の粒径/膜厚コントロールとその評価」」 pp.109-116(2011) 技術情報協会

武藤浩行、「静電吸着複合法によるナノ集積構造体の創製と微構造制御型機能性コンポジットの製造」、未来材料、11[11]、pp.52-57(2011).

松田厚範、「無機固体酸複合体とその複合化「イオン伝導体の材料技術と測定。評価」(仮)」、印刷中(2011). サイエンス&テクノロジー

濱上寿一・松田厚範、「水素ガスセンサ「イオン伝導体の材料技術と測定。評価」(仮)」、印刷中(2011).

松田厚範、「プロトン伝導性オキソ酸塩-ヘテロポリ酸系ナノ複合体」、ケミカルエンジニアリング、56[10], pp.6[742]-11[747] (2011).

松田厚範・大幸裕介、「ヘテロポリ酸-オキソ酸塩系複合体のメカノケミカル合成とプロトンダイナミックス」、Annual Report of The Murata Science Foundation, 25, pp.113-122 (2011).



top of page


Year 2010


A. Matsuda, V. H. Nguyen, Y. Daiko, H. Muto and M. Sakai, "Three-Dimentional Hydrogen-Bonding Networks and Proton Dynamics of Mechanochemically Synthesized CsHSO4-WPA Composites", Solid State Ionics, 181[3-4] 180-182 (2010).

Y. Daiko, V. H. Nguyen, T. Yazawa, H. Muto, M. Sakai, and A. Matsuda, "Phase Transition and Proton Conductivities of CsHSO4-WPA Composites Prepared by Mechanical Milling", Solid State Ionics, 181[3-4] 183-186 (2010).

Y. Daiko, K. Katagiri, T. Yazawa, and A. Matsuda, "Thickness dependences of Proton Conductivity for Ultrathin Nafion Multilayers Prepared via Layer-by-Layer Assembly", Solid State Ionics, 181[3-4] 197-200 (2010).

H. Sakamoto, Y. Daiko, K. Katagiri, H. Muto, M. Sakai, and A. Matsuda, "Preparation of Sheet-like Electrolytes from Poly(2-acrylamido-2-methyl-1-propanesulfonic acid)-Deposited Phenylsilsesquioxane Particles", Solid State Ionics, 181[3-4] 210-214 (2010).

M. M. Ayad, A. Matsuda, and Niki Prastomo, "Synthesis and Characterization of Polyaniline-Camphorsulphonic Acid nanotube Films", Materials Letters, 64[3] 379-382 (2010).

A. Matsuda, T. Kambayashi, Y. Daiko, H. Muto, and M. Sakai, "Electrophoretic Deposition of Surface-Modified Titanate Nanosheets via Layer-by-Layer Assembly and Deposited Film Properties", Journal of the European Ceramic Society, 30[5] 1151-1158 (2010).

Y. Daiko and A. Mastuda, "Preparation of Proton Conductive Solid Acid Composites by Mechanical Milling -Review paper-", Journal of the Japan Petroleum Institute, 53[1] 24-32 (2010).

M. M. Ayad, Niki Prostomo, A. Matsuda, "Sensing of Silver Ions by Nanotubular Polyaniline Film Deposited on Quartz-Crystal in a Microbalance",  J. Stejskal Synthetic Metals, 160[1-2] 42-46 (2010).

G. Kawamura, S. Sato, T. Kogure, Y. Daiko, H. Muto, M. Sakai, and A. Matsuda, "Photoinduced Reduction and Heat-Induced Oxidation of Silver in Transparent RSiO3/2 and RSiO3/2-TiO2 Films", Physical Chemistry Chemical Physics, 12[25] 6859-6863 (2010).

J. Hamagami, R. Araki, H. Oda, M. Sakai, and A. Matsuda, "Preparation and Characterization of Pd-Based Optical Hydrogen Sensor Operated at Room Temperature by Using Photodeposition Process", Key Engineering Materials, 445 100-104 (2010).

S-Y. Oh, T. Yoshida, G. Kawamura, H. Muto, M. Sakai, and A. Matsuda, "Proton Conductivity and Fuel Cell Property of Composite Electrolyte Containing Cs-Substituted Heteropoly Acids and Sulfonated Poly(Ether-Ether Ketone)", Journal of Power Sources, 195[18] 5822-5828 (2010).

H. Sakamoto, Y. Daiko, K. Katagiri, H. Muto, M. Sakai, and A. Matsuda, "Percolated Interface Conductivity of Sheet-Like Electrolyte Prepared from PAMPS-deposited Core-Shell Particles and Effect of Core Particle Size", Journal of Power Sources, 195[18] 5942-5946 (2010).

松田厚範、「ゾル-ゲル法技術の最新動向」、 ゾル-ゲルマイクロ・ナノパターニング、pp.153-166 (2010) シーエムシー.

村田航平・武藤浩行・河村剛・松田厚範・逆井基次、 「個別要素法による粒子集合体の大変形機構の解明」、 材料, 59[6] 434-438 (2010).

大幸裕介・松田厚範、「酸化チタン光触媒を利用した薄膜電気化学素子の研究開発」、Material Stage, 10[4] 43-46 (2010).

Y. Daiko, S. Hayashi and A. Matsuda, "Nanometer Scale Proton Conductivity and Dynamics of CsHSO4 and H3PW12O40 Composites under Non-Humidified Conditions", Chemistry of Materials, 22[11] 3418-3425 (2010).

S-Y. Oh, T. Yoshida, G. Kawamura, H. Muto, M. Sakai and A. Matsuda, "Inorganic-Organic Composite Electrolytes Consisting of Polybenzimidazole and Cs-Substituted Heteropoly Acids and Their Application for Medium Temerature Fuel Cell", Journal of Materials Chemistry, 20[30] 6359-6399 (2010).

大幸裕介・松田厚範、酸化チタン光触媒を利用した薄膜電気化学素子の研究開発、Material Stage, 10[4] (2010).

G. Kawamura, S. Sato, H. Muto, M. Sakai, P. B. Lim, K. Watanabe, M. Inoue, A. Matsuda, "AgBr Nanocrystal-Dispersed Silsesquioxane-Titania Hybrid Films for Holographic Materials", Materilas Letters, 64[23] 2648-2651 (2010).

S-Y. Oh, T. Yoshida, G. Kawamura, H. Muto, M. Sakai, and A. Matsuda, "Composite Electrolytes Composed of Cs-Substituted Phosphotungstic Acid and Sulfonated Poly(Ether-Ether Ketone) for Fuel Cell Systems", Materials Science and Engineering B, 173[1-3] 260-266 (2010).

武藤浩行、 「物性と評価4:機械的性質」、 平成22年度セラミックス大学 アドバンスコーステキスト 129-143 (2010) (社)日本セラミックス協会.

片桐清文・大幸裕介・武藤浩行、「交互積層法を利用したコアシェル粒子・中空カプセルの作製と機能材料への応用」、コアシェル粒子の設計・合成技術・応用の展開、pp.25-38 (2010) シーエムシー.

武藤浩行、「静電吸着複合法による集積複合粒子の調整と複合材料の微細構造制御」、FRAGRANCE JOURNAL、38[7]、pp52-57 (2010).

M. Nogami, R. Koike, R. Jalem, G. Kawamura, Y. Yang and Y. Sasaki, "Synthesis of Porous Single-Crystalline Platinum Nanocubes Composed of Nanoparticles", The Journal of Physical Chemistry Letters, 1 568-571 (2010).

Y. Yang, M. Tanemura, Z. Huang, D. Jiang, Z-Y. Li, Y-P. Huang, G. Kawamura, K. Yamaguchi and M. Nogami, “Aligned gold nanoneedle arrays for surface-enhanced Raman scattering”, Nanotechnology, 21 325701 (2010).

河村剛・松田厚範、「無機-有機ハイブリッド中での銀光析出・熱解離とホログラム材料への応用」、セラミックデータブック2010/11年版、pp181-184 (2010) 工業製品技術協会.

松田厚範、「プロトン伝導性コア/シェル粒子のイオニクス素子への応用」コア/シェル粒子の粒径/膜厚コントロールとその評価、pp.109-1162011.技術情報協会

N. Prastomo, H. Muto, M. Sakai, and A. Matsuda, "Formation and Stabilization of Tetragonal Phase in Sol-Gel Derived ZrO2 Treated with Base-Hot Water",  Materials Science and Engineering B, 173 [1-3] 99-104 (2010).

N. Prastomo, K. Kimata, Y. Daiko, H. Muto, M. Sakai, and A. Matsuda, "Aspect ratio study of Nanocrystallites Formed on Sol-Gel Derived Coatings with External Field Hot-Water Treatment", Journal of Sol-Gel Science and Technology, 56[3] 345-352 (2010).

Y. Daiko and A. Matsuda, "Preparation of Proton Conductive Heteropoly Acid-Based Composites by Mechanical Milling and Layer-by-Layer Assembly ", in “Fast Proton-Ion Transport Compounds” Editors U. B. Mioc and M. Davidovic, pp.1-17 Transworld Research Net Work (2010).

A. Matsuda, V. H. Nguyen, Y. Daiko, H. Muto and M. Sakai, "Three-Dimensional Hydrogen-Bonding Networks and Proton Conductivities under Non-Humidified Conditions of CsHSO4-WPA Composites", Solid State Ionics, 181[3-4] 180-182 (2010).

N. Prastomo, H. Muto, M. Sakai and A. Matsuda, "Formation and Stabilization of Tetragonal Phase in Sol-Gel Derived ZrO2 Treated with Base-Hot-Water", Materials Science and Engineering B, 173 [1-3] 99-104 (2010).

河村剛、「メソポーラスシリカ中で寸法と方向を制御された金ナノロッド」、12th International Ceramics Congress of CIMTEC2010 村田学術振興財団 Annual Report24, 851-852 (2010)

M. Sakai, "Substrate-affected contact deformation and hardness of an elastoplastic film coated on purely elastic substrates", Original Research Article Surface and Coatings Technology, 204[8], 1247-1251 (2010)


top of page

Year 2009


N. Hakiri, A. Matsuda, and M. Sakai, "Instrumented Indentation Microscope Applied to the Elastoplastic Indentation Contact Mechanics of Coating/Substrate Composites, Journal of Materials Research, 24[6] 1950-1959 (2009).

H. Muto, K. Kimata, K. Murata, Y. Daiko, A. Matsuda and M. Sakai, "Fabrication of Three-Dimensionally Close-Packed Aggregate of Particles under Mechnical Vibration", Materials Science and Engineering B, 161[1-3] 193-197 (2009).

K. Katagiri, K. Komoto, S. Iseya, M. Sakai, A. Matsuda and F. Caruso, "Tunable UV-Responsive Organic-Inorganic Hybrid Capsules", Chemistry of Materials, 21[2] 195-197 (2009).

Niki Prastomo, Y. Daiko, T. Kogure, H. Muto, M. Sakai, and A. Matsuda, "Formation Mechanism of Titania Nanosheet Crystallites on Silica-Titania Gel Films by Vibration Hot-Water Treatment", Materials Science and Engineering B, 161[1-3] 170-174 (2009).

S. Sakakibara, T. Suzuki , T. Uchikoshi, A. Matsuda, and Y. Sakka, "Surface Modification of SiC Powder for Use in Electrophoretic Deposition", Key Engineering Materials, 412 287-290 (2009).

T. Kambayashi, Y. Daiko, H. Muto, M. Sakai and A. Matsuda, "Electrophoretic Deposition and Photocatalytic Activity of Titanate Nanosheets", Key Engineering Materials, 412 59-64 (2009).

Y. Daiko, S. Sakakibara, H. Sakamoto, K. Katagiri, H. Muto, M. Sakai, and A. Matsuda, "Formation of a High Conductivity Fuel Cell Electrolyte by Pressing Diphenylsiloxane-Based Inorganic-Organic Hybrid Particles", Journal of the American Ceramic Society, 92[1] 185-188 (2009).

A. Matsuda, T. Kikuchi, R. Murayama, T. Kogure, K. Katagiri, H. Muto, and M. Sakai, "Formation of Photocatalytic Novel Oxide Crystallites with Al:Ti=1:1 in Al2O3-TiO2 Gels by Mechanochemical Treatment", Journal of Nanoscience and Nanotechnology, 9[1] 342-349 (2009).

Y. Daiko, K. Katagiri and A. Matsuda, "Highly Hydrophobic Flip-Flop-Type Ultrathin Coating Films Prepared via Electrostatic Self-Assembly", Journal Nanoscience and Nanotechnology, 9[1] 404-407 (2009).

松田厚範, ゾル−ゲル法によるガラス・セラミックス・無機有機複合体, ニューガラス大学院応用課程テキスト, ニューガラスフォーラム, 10-1〜9-23 (2009)

大幸裕介・松田厚範、「交互積層法によるプロトン伝導性ナノ薄膜の合成とガスセンサおよび燃料電池への応用」、燃料電池、5[3] 35-41 (2009).


top of page


Year 2008


Y. Daiko, K. Katagiri and A. Matsuda "Proton Conduction in Thickness-Controlled Ultrathin Polycation/Nafion Multilayers Prepared via Layer-by-Layer", Assembly Chemistry of Materials, 20[20] 6405-6409 (2008).

K. Katagiri, T. Suzuki, H. Muto, M. Sakai, and A. Matsuda, "Low Temperature Crystallization of TiO2 in Layer-by-Layer Assemblyed Thin Films Formed from Water-Soluble Ti-Complex and Polycations", Colloids and Surfaces A: Physcochemical Engineering Aspects, 321[1-3] 233-237 (2008).

Y. Daiko, K. Ogura, K. Katagiri, H. Muto, M. Sakai and A. Matsuda, "Surface-Sulfonation and Fuel Cell Property of Phenylsilsesquioxane-Based Particles", Solid State Ionics, 179[21-26] 1166-1169 (2008)

Y. Daiko, H. Takagi, K. Katagiri, H. Muto, M. Sakai and A. Matsuda, "Mechanochemically Synthesized Cesium Ion-Substituted Phosphotungstic Acid Using Several Kinds of Cesium-Containing Salts", Solid State Ionics, 179 [21-26] 1174-1175 (2008).

Y. Daiko, H. Sakamoto, K. Katagiri, H. Muto, M. Sakai and A. Matsuda, "Deposition of Ultra-Thin Proton Conductors on Sol-Gel-Derived Phenylsilsesquioxane Particles via Layer-by-Layer Assembly Technique", Journal of Electrochemical Society, 155[5] B479-B482 (2008).

K. Tadanaga, N. Yamaguchi, Y. Uraoka, A. Matsuda, T. Minami, M. Tatsumisago, "Anti-reflective properties of nano-structured alumina thin films on poly(methyl methacrylate) substrates by the sol-gel process with hot water treatment", Thin Solid Film, 516[14] 4526-4529 (2008).

武藤浩行、木股幸司、大幸裕介、松田厚範、逆井基次, "力学刺激による大面積微粒子集積体の作製", 粉体工学会和文誌45[3] 168-172 (2008).

H. Muto, K. Kimata, A. Matsuda nd M. Sakai, "Experimental and Simulation Study on the Role of Formation Mechanism for Two-Dimensional Particle Arrangement", Materials Science Engineering B, 148[1-3] 199-202 (2008).

K. Takahashi, K. Tadanaga, A. Hayashi, A. Matsuda and M. Tatsumisago, "Glass Transition and Thermal Softening of Poly(phenylsilsesquioxane) Particles Prepared by Two-Step Acid-Base Catalyzed Sol-Gel Process", Journal of Non-Crystalline Solids, 354[2-9] 700-704 (2008).

A. Matsuda, K. Shimoike, K. Katagiri, H. Muto and M. Sakai, "Periodic Alignment of Sol-Gel Derived, Monodisperse Phenylsilsesquioxane Particles on a Pregrooved Substrate", Journal of Non-Crystalline Solids, 354[12-13] 1318-1321 (2008).

A. Matsuda, K. Kobayashi, T. Kogure, M. Sakai, K. Tadanaga, T. Minami and M. Tatsumisago, "Characterization of Ramiform Precipitates Formed on SiO2-TiO2 Gel Coatings by Electric Field Hot Water Treatment", Journal of Non-Crystalline Solids, 354[12-13] 1263-1266 (2008).

大幸裕介・片桐清文・松田厚範、「プロトン伝導性ナノシェル層を有する無機−有機ハイブリッド微粒子のシート化と燃料電池への応用」、表面、46, No.2, pp.9(67)-18(76)(2008).

松田厚範、「ゾル−ゲル法によるガラス・セラミックス・無機有機複合体」、ニューガラス大学院応用課程テキスト、pp.9-1〜9-21, ニューガラスフォーラム(2008).

松田厚範、「セシウム塩-リンタングステン酸系ナノプロトニクス材料のメカノケミカル合成とプロトンダイナミックス」、燃料電池、8, No.2, pp.76-83 (2008).

大幸裕介・松田厚範、「イオン性液体を固定化した機能性カプセルの作製」、ケミカルエンジニアリング、53, No.12, pp.38[934]-42[938](2008).


top of page




Year 2007
K. Katagiri, T. Suzuki, H. Muto, M. Sakai, and A. Matsuda, "Low Temperature crystallization of TiO2 in Layer-by-Layer Assemblyed Thin Films Formed from Water-Soluble Ti-Complex and Polycations" Colloids and Surfaces A: Physcochemical Engineering Aspects, 掲載決定 (2007).

武藤浩行、西山宏人、松田厚範、逆井基次, "メカニカルミリング法によるナノα−アルミナ粉末の作製", 粉体および粉末冶金, 54[12], 839-842 (2007).

K. Katagiri, K. Komoto, S. Iseya, M. Sakai, A. Matsuda and F. Caruso, "Tunable UV-Responsive Organic-Inorganic Hybrid Capsules", Journal American Chemical Society, 投稿中

K. Takahashi, K. Tadanaga, A. Hayashi, A. Matsuda, K. Kakagiri and M. Tatsumisago, "Structure of Polyphenylsilsesquioxane Particles Prepared by Two-Step Acid-Base Catalyzed Sol-Gel Process and Formation of Hollow Particles", Journal of Nanoscience and Nanotechnology, 7[9] 3007-3312 (2007).

K. Takahashi, K. Tadanaga, A. Hayashi, M. Tatsumisago and A. Matsuda, "Thermoplastic and Thermosetting Properties of Polyphenylsilsesquioxane Particles Prepared by Two-Step Acid-Base Catalyzed Sol-Gel Process" Journal of Sol-Gel Science and Technology, 41[3] 217-222 (2007).

A. Matsuda, R. Ogawa, Y. Daiko, K. Tadanaga and M. Tatsumisago, "Micropatterning for Vinylsilsesquioxane-Titania Hybrid Gel Films with Ultraviolet Light Irradiation", Journal of Photopolymer Science and Technology, 20[1] 101-105 (2007).

Y. Daiko, K. Katagiri, K. Shimoike, M. Sakai and A. Matsuda, "Structures and Electrical Properties of Core-Shell Composite Electrolytes with Multi-Heterointerfaces", Solid State Ionics, 178[7-10] 621-625 (2007).

Y. Daiko, K. Katagiri, K. Ogura, M. Sakai and A. Matsuda, "Preparation and Characterization of Surface-Sulfonated Phenylsilsesquioxane-Methylsilsesquioxane Particles", Solid State Ionics, 178[7-10] 601-605 (2007).

A. Matsuda, Y. Daiko, T. Ishida, K. Tadanaga and M. Tatsumisago, "Characterization of Proton Conductive SiO2-H3PW12O40 Composites Prepared by Mechanochemical Treatment",Solid State Ionics, 178[7-10] 709-712 (2007).

A. Matsuda, T. Kikuchi, K. Katagiri, Y. Daiko, H. Muto, and M. Sakai, "Mechanochemical Synthesis of Proton Conductive Cesium Hydrogen Salts of 12-Tungstophosphoric Acid and Their Composites", Solid State Ionics, 178[7-10] 723-727 (2007).

K. Takahashi, K. Tadanaga, A. Matsuda, A. Hayashi, and M. Tatsumisago, "Effects of Phenyltriethoxysilane Concentration in Starting Solutions on Thermal Properties of Poly(phenylsilsesquioxane) Particles Prepared by a Two-Step Acid-Base Catalyzed Sol-Gel Process", Journal of the Ceramic Society of Japan, 115[2] 131-135 (2007).

N. Yamaguchi, K. Tadanaga, A. Matsuda, T. Minami and M. Tatsumisago, "Antireflective Properties of Flowerlike Alumina Thin Films on Soda-Lime-Silica Glass Substrates Prepared by the Sol-Gel Method with Hot Water Treatment", Thin Solid Films, 515[7-8], 3914-3917 (2007).

K. Takahashi, K. Tadanaga, A. Matsuda, A. Hayashi and M. Tatsumisago, "Fabrication of Convex-Shaped Polybenzylsilsesquioxane Micropatterns by the Eectrophoretic Sol-Gel Deposition Process Using Indium Tin Oxide Substrates with a Hydrophobic-Hydrophilic-Patterned Surface", Journal of Sol-Gel Science and Technology, 43[1] 85-92 (2007).


top of page




Year 2006

N. Yamaguchi, K. Tadanaga, A. Matsuda, T. Minami and M. Tatsumisago, "Formation of Anti-Reflective Alumina Coating Films on Polymer Substrates by the Sol-Gel Process with Hot Water Treatment", Surface & Coatings Technology, 201[6], 3653-3657 (2006).

K. Katagiri, A. Matsuda, and Frank Caruso, "Effect of UV-Irradiation on Polyelectrolyte Multilayered Films and Hollow Capsules Prepared by Layer-by-Layer Assembly", Macromolecules, 39[23], 8067-8074 (2006).

K. Ogura, Y. Daiko, K. Katagiri, H. Muto, M. Sakai and A. Matsuda, "Preparation of Surface-Sulfonated Organic-Inorganic Hybrid Particles for Proton Conducting Electrolyte", Journal of Ecotechnology Research, ASET13 Abstract, 12[4], 253 (2006).

K. Takahashi, K. Tadanaga, A. Matsuda, A. Hayashi and M. Tatsumisago, "Micropatterning of Poly(benzylsilsesquioxane) Transparent Thick Films Prepared by the Electrophoretic Sol-Gel Deposition Process Using a Hydrophiolic-Hydrophobic Patterned Surface", Journal of the American Ceramic Society, 89[12], 3832-3835 (2006).

M. Sakai, N. Hakiri, T, Miyajima, "Instrumented Indentation Microscope: A Powerful Tool for the Mechanical Charactarization in Micro-scales", Journal of Materials Research, 掲載決定

K. Takahashi, A. Matsuda, K. Tadanga, A. Hayashi and M. Tatsunisago, "Characterization and Electrophoretic Deposition of Poly(phenylsilsesquioxane)-Titania Hybrid Particles by Sol-Gel Method", Journal of American Ceramic Society, 89[10], 3107-3111 (2006).

A. Matsuda, Y. Higashi, K. Tadanga and M. Tatsunisago, "Hot-Water Treatment of Sol-Gel Derived SiO2-TiO2 Microparticles and Application to Electrophretic Deposition for Tick Films", Journal of Materials Science, 41[24], 8101-8108(2006).

A. Matsuda, N. Nakamoto, K. Tadanaga, T. Minami and M. Tatumisago, "Operation of PEFC using Composite Sheets Composed of Phosphosilicate Gels and Thermally Stable Organic Polymers", Solid State Ionics, 177 [26-32], 2437-2441 (2006).

A. Matsuda, T. Kikuchi, K. Katagiri, H. Muto and M. Sakai, "Structure and Proton Conductivity of Mechanochemically Treated 50CsHSO4-50CsH2PO4", Solid State Ionics, 177[26-32] 2421-2424 (2006).

H. Muto, R. Yamada, A. Matsuda and M. Sakai, "Indentation Contact Deformation of Superplastic and Non-Superplastic 3Y-TZP at Elevated Temperatures", Philosophical Magazine, 86[33-35], 5643-5652 (2006).

N. Yamaguchi,, T. Nakamura, K. Tadanaga, A. Matsuda, T. Minami and M. Tatsumisago, "Direct Formation of Zn-Al Layered Double Hydroxide Films with High Transparency on Glass Substrate by the Sol-Gel Process with Hot Water", Treatment Crystal Growth & Design, 6[7], 1726-1729 (2006).

K. Takahashi, K. Tadanga, A. Hayashi, A. Matsuda and M. Tatsunisago, "Formation of Convex Shaped Poly(phenylsilsesquioxane) Micropatterns on Indium Tin Oxide Substrates with Hydrophobic-Hydrophilic Patterns Using Electrophoretic Sol-Gel Deposition Method", Journal of Materials Research, 21[5], 1255-1260 (2006).

K. Katagiri, G. Harada, A. Matsuda, T. Kogure, H. Muto and M. Sakai, "Effects of Addition of Supramolecular Assembly on the Anatase Nanocrystalline Precipitation of Sol-Gel Derived SiO2-TiO2 Coating Films by Hot-Water Treatment", Journal of Nanoscience and Nanotechnology, 6[6], 1802-1806 (2006).

K. Tadanga, T. Sueki, A. Matsuda, T. Minami and M. Tatsunisago, "Micropatterning of Inorganic-Organic Thick Hybrid Coating Films from Vinyltriethoxysilane", Journal of the Ceramic Society of Japan, 114[1], 125-127 (2006).

A. Matsuda, M. Sakai, T. Kogure, K. Tadanaga, M. Tatsumisago, "External-Field Hot-Water-Treatments of Sol-Gel Derived SiO2-TiO2 Coatings for Surface Nanostructure Control - A Review -", Journal of the Ceramic Society of Japan, 114[1], 26-35 (2006).

K. Shimoike, A. Matsuda, H. Muto and M. Sakai, "Synthesis of Monodiepersed Inorganic-Organic Hybrid Particles from Phenyltriethoxysilane", Key Engineering Materials, 317/318, 677-682 (2006).

A. Matsuda, T. Kogure, H. Muto, M. Sakai, K. Tadanaga, T. Minami and M. Tatsumisago, "Titania Nanocrystals-Despersed Coatings from SiO2-TiO2 Gel Films through Hydrolysis and Dissolution", Key Engineering Materials, 317/318, 565-568 (2006).

H. Muto, R. Yamada, A. Matsuda and M. Sakai, "Indentation Contact Deformation of 3Y-TZP at Elevated Temperatures", Key Engineering Materials, 317/318, 469-472 (2006).

J. Q. Zhang, A. Matsuda, H. Muto and M. Sakai, "Mecahnical Properties of Sol-Gel Inorganic-Organic Hybrid Films in Nanoindentation Test", Key Engineering Materials, 317/318, 317-322 (2006).

N. Yamaguchi, T. Nakamura, K. Tadanaga, A. Matsuda, T. Minami and M. Tatsumisago, "Platelike Crystal Growth of Zn-Al Layered Double Hydroxide by Hot Water Treatment of Sol-Gel Derived Al2O3-ZnO Films on Glass Substrate", Chemistry Letters, 35[2], 174 (2006).

H. Muto, A. Matsuda and M. Sakai, "Superplastic Joining of 3Y-TZP", Journal of the European Ceramic Society, 26[4-5], 379-384 (2006).

K. Tadanaga, K. Takahashi, M. Tatsumisago and A. Matsuda, "Micropatterning of Phenylsilsesquioxane Thich Films by the Electrophoretic Sol-Gel Deposition Process Using ITO Substrates with Hydrophobic-Hydrophilic Patterned Surface" Key Engineering Materials, 314, 159-166 (2006).

A. Matsuda, Y. Higashi, K. Tadanaga, T. Minami, and M. Tatsumisago, "Electrophoretic Deposition of Sol-Gel Derived V2O5 microparticles and Application to Cathode for Lithium Secondary Batteries", Key Engineering Materials, 314, 107-114 (2006).


top of page




Year 2005

T. Tezuka, K. Tadanaga, A. Matsuda, A. Hayashi and M.Tatsumisago, "Utilization of Glass Papers as a Support of Proton Conductive Inorganic-Organic Hybrid Membranes form 3-Glycidoxypropyltrimethoxysilane, Tetraalkoxysilane, and Orthophosphoric Acid", Solid State Ionics, 176[39/40], 3001-3004 (2005).

K. Tadanaga, H. Yoshida, A. Matsuda, T. Minami and M.Tatsumisago, "Inoragaic-Organic Hybrid Films Using Epoxycyclohexylethyltrimethoxysilane and Orthophosphoric Acid for PEFC Operated at Medium Temperatures", Solid State Ionics, 176[39/40], 2997-2999 (2005).

A. Matsuda, T. Tezuka, Y. Nono, K. Tadanaga, T. Minami and M.Tatsumisago, "Preparation of Proton Conductive Composites by Mechanical Milling for Phosphorus-Containing Solid Acids", Solid State Ionics, 176[39/40], 2899-2904 (2005).

M. Sakai, M. Sasaki and A. Matsuda, "Indentation Stress Relaxation of Sol-Gel-Derived Organic/Inorganic Hybrid Coating", Acta Materials, 53[16], 4455-4462 (2005).

M. Sakai, J. Zhang and A. Matsuda, "Elastic Deformation of Coating/Substrate Composites in Axisymmetric Indentation", Journal of Materials Research, 20[8], 2173-2183 (2005).

T. Sasaki, A. Matsuda, K. Tadanaga and M. Tatsumasago, "Structural Changes in RSiO3/2-TiO2 Hybrid Films with UV Irradiation and Their Photocatalytic Micropatterning", Journal of the Ceramic Society of Japan, 113[4], 333-335 (2005).

T. Tezuka, K. Tadanaga, A. Matsuda, A. Hayashi and M.Tatsumisago, "Utilization of Glass Papers as a Support of Proton Conductive Inorganic-Organic Hybrid Membranes Based on 3-Glycidoxypropyltrimethoxysilane", Electrochemistry Communication, 7[3], 245-248 (2005).

A. Matsuda, T. Matoda, T. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago,"Lowering of Preparation Temperatures of Anatase Nanocrystals-Dispersed Coatings via Sol-Gel Process, with Hot Water Treatment", Journal of the American Ceramic Society, 88[6], 1421-1426 (2005).

A. Matsuda, T. Matoda, T. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago, "Formation and Characterization of Titania Nanosheets-Precipitated Coatings via Sol-Gel Process with Hot Water Treatment under Vibrations", Chemistry of Materials, 17[4], 749-757 (2005).

N. Yamaguchi, K. Tadanaga, A. Matsuda, T. Minami and M.Tatsumisago, "Anti-Reflective Coatings of Flowerlike Alumina on Various Glass Substrates Prepared by the Sol-Gel  Process with Hot Water Treatment", Journal of Sol-Gel Science and Technology, 33[1], 117-120 (2005).

A. Matsuda, T. Matoda, T. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago,"Characterization of Anatase Nanocrystals-Precipitated Coatings from (100-x)SiO2. xTiO2 Gel Films via the Sol-Gel Process with Boiling Hot Water Treatment", Journal of Materials Research, 20[1], 256-263 (2005).

A. Matsuda, K. Kobayashi, T. Kogure, M. Sakai, K. Tadanaga, T. Minami and M. Tatsumisago, "Effects of Electric Field on the Formation of Titania Nanocrystals on SiO2-TiO2 Coatings during Hot Water Treatment", Journal of the Ceramic Society of Japan, 113[8], 519-524 (2005).

A. Matsuda, T. Matoda, T. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago, "Lowering of Preparation Temperatures of Anatase Nanocrystals-Dispersed Coatings via Sol-Gel Process with Hot Water Treatment", Journal of the American Ceramic Society, 88[6], 1421-1426 (2005).

K. Katagiri and F. Caruso, "Monodispersed Polyelectrolyte-Supported Asymmetric Lipid Bilayer Vesicles", Advanced Materials, 17[6], 738-743 (2005).


top of page




Year 2004

M. Sakai; "Simultaneous Estimate of Elastic/plastic Parameters in Depth-Sensing Indentation Tests", Scripta Materialia, 51[5], 391-395 (2004).

A. J. Zhang and M. Sakai; "Geometrical Effect of Pyramidal Indenters on The Elastoplastic Contact Behaviors of Ceramics and Metals", Materials Science and Engineering A, 381[1-2], 62-70 (2004).

M. Sakai, T. Akatsu and S. Numata; "Finite Element Analysis for Conical Indentation Unloading of elastoplastic materials with strain hardening", Acta Materialia, 52[8], 2359-2364 (2004).

H. Muto, Y. Takahashi and M. Sakai; "Grain-Size-Dependent Cooperative Grain-Boundary Sliding in Superplastic Deformation", Materials Science Forum, 447-448, 97-102 (2004).

H. Muto and M. Sakai; "Elastoplastic Line Contact in Cylindrical Indentation", Materials Science Forum, 449-452, 857-860 (2004).

M. Sakai and Y. Nakano; "Instrumented pyramidal and spherical indentations of polycrystalline graphite", Journal of Materials Research, 19[1], 228-36 (2004).

K. Katagiri and F. Caruso, "Functionalization of Colloids with Robust Inorganic-Based Lipid Coatings", Macromolecules, 37[26], 9947-9953 (2004).

K. Tadanaga, H. Yoshida, A. Matsuda, T. Minami and M. Tatsumisago, "Preparation of Proton Conductive Inorganic-Organic Hybrid Films Using Epoxycyclohexylethyltrimethoxysilane and Orthophosphoric Acid", Journal of Sol-Gel Science and Technology, 31[1-3], 365-368 (2004).

K. Tadanaga, T. Minami, T. Fujii, A. Matsuda and M. Tatsumisago, "Micropatterning of Sol-Gel Derived Thin Films Using Hydrophobic-Hydrophilic Patterned Surface", Journal of Sol-Gel Science and Technology, 31[1-3], 229-233 (2004).

A. Matsuda, T. Matoda, T. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago, "Preparation of Titania Nanosheets-Precipitated Coatings on Substrates by Treating SiO2-TiO2 Gel Films with Hot Water under Vibrations", Journal of Sol-Gel Science and Technology, 31[1-3], 229-233 (2004).

K. Tadanaga, H. Yoshida, A. Matsuda, T. Minami and M. Tatsumisago, "Micropatterning of SnO2 Thin Films Using Hydrophobic-Hydrophilic Patterned Surface", Ceramics International, 30[7], 1815-1817 (2004).

K. Tadanaga, H. Yoshida, A. Matsuda, T. Minami and M. Tatsumisago, "Medium Temperature Operation of Fuel Cells Using Inorganic-Organic Hybrid Films from 3-Glycidoxypropyltrimethoxysilane and Orthophosphoric Acid", Electrochimica Acta, 50[2-3], 701-704 (2004).

N. Nakamoto, A. Matsuda, K. Tadanaga, T. Minami and M. Tatsumisago, "Medium Temperature Operation of Fuel Cells Using Thermally Stable Proton-Conducting Composite Sheets Composed of Phosphosilicate Gel and Polyimide", Journal of Power Sources, 138[1-2], 51-55 (2004).

A. Matsuda, T. Tanaka, K. Tadanaga, T. Minami and M. Tatsumisago, "Preparation and Characterization of Copolymerized Methylsilsesquioxane-Benzylsilsesquioxane Microparticles for Electrophoretic Sol-Gel Deposition", Journal of Materials Science, 39[3], 903-909 (2004).

K. Kobayashi, A. Matsuda, K. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago, "Hydrophobic and Photocatalytically Active Surface Using Micropatterns of Anatase Nanocrystals-Dispersed Film", Journal of Ceramic Society of Japan, 112[5], S1425-1429 (2004).

A. Matsuda, T. Matoda, T. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago, "Preparation of Titania Nanosheets-Precipitated Coatings on Substrates by Treating SiO2-TiO2 Gel Films with Hot Water under Vibrations", Journal of Sol-Gel Science and Technology, 30[7], 1815-1817 (2004).


top of page



Year 2003

H. Muto, Y. Takahashi and M. Sakai; "The Role of Grain Morphology in Superplastic Deformation", Key Engineering Materials, 247, 283-6 (2003).

M. Sakai; "Elastic recovery in the unloading process of pyramidal microindentation", Journal of Materials Research, 18[7], 1631-40 (2003).

M. Sakai, T. Akatsu, S. Numata and K. Matsuda; "Linear strain hardening in elastoplastic indentation contact", Journal of Materials Research, 18[9], 2087-96 (2003).

K. Tadanaga, H. Yoshida, A. Matsuda, T. Minami and M. Tatsumisago, "Inorganic-Organic Hybrid Films from 3-Glycidoxypropyltrimethoxysilane and Orthophosphoric Acid as Medium Temperature Fuel Cells", Electrochemistry Communications, 5[8], 644-646 (2003).

C. Iwakura, K. Kumagae, K. Yoshiki, S. Nohara, N. Furukawa, H. Inoue, M. Tatsumisago, T. Minami and A. Matsuda, "All Solid State Nickel/Metal Hydride Battery with a Proton Conductive Phosphoric Acid-Doped Silica Gel Electrolyte", Electrochimica Acta, 48, 1499-1503 (2003).

A. Matsuda, Y. Nono, K. Tadanaga, T. Minami and M. Tatsumisago, "Proton Conductivity at Medium Temperature Range and Chemical Durability of Phosphosilicate Gels Added with a Third Component", Solid State Ionics, 162-163, 253-259 (2003).

A. Matsuda, N. Nakamoto, K. Tadanaga, T. Minami and M. Tatsumisago, "Preparation and Characterization of Thermally Stable Proton-Conducting Composite Sheets Composed of Phosphosilicate Gel and Polyimide", Solid State Ionics, 162-163, 247-252 (2003).

A. Matsuda, T. Matoda, K. Kogure, K. Tadanaga, T. Minami and M. Tatsumisago, "Formation of Anatase Nanocrystals-Precipitated Coatings on Plastic Substrates by the Sol-Gel Process with Hot Water Treatment", Journal of Sol-Gel Science and Technology, 27[1], 61-69 (2003).

K. Tadanaga, H. Yoshida, A. Matsuda, T. Minami and M. Tatsumisago, "Prepapration of Proton Conductive Inorganic-Organic Hybrid Films from 3-Glycidoxylpropyltriethoxysilane and Orthophosphoric Acid", Chemistry of Materials, 15[9], 1910-1912 (2003).

K. Tadanaga, K. Kitamuro, A. Matsuda and T. Minami, "Formation of Superhydrophobic Alumina Coating Films with High Transparency on Polymer Substrates by the Sol-Gel Method", Journal of Sol-Gel Science and Technology, 23[1-3], 705-708 (2003).

K. Tadanaga, K. Ueyama, A. Matsuda and T. Minami, "Micropatterning of Inorganic-Organic Hybrid Coating Films form Various Tri-Functional Silicon Alkoxides with a Double Bond in Their Organic Components", Journal of Sol-Gel Science and Technology, 23[1-3], 431-434 (2003).

A. Matsuda, T. Matoda, Y. Kotani, K. Kogure, M. Tatsumisago and T. Minami, "Evaluation of Photocatalytic Activities of Transparent Anatase-Nanocrystals Dispersed Silica Films Prepared by the Sol-Gel Process with Hot Water Treatment", Journal of Sol-Gel Science and Technology23[1-3], 517-521 (2003).


top of page
HOME